The 'health code' of the engine is hidden in every drop of coolant. OPALLUB's new coolant comes with the international OAT standard, which not only redefines anti-corrosion protection with organic acid technology, but also introduces two performance level specifications - from extreme cold to extreme heat, from red classic to green personality, fully meeting the heat dissipation needs of different regions and vehicle models, allowing the engine to always "run at a constant temperature" throughout the four seasons.

🔑  Core breakthrough: OAT standard enables the cooling system to operate with "zero corrosion".

Traditional coolant relies on inorganic acid salts for passive rust prevention, which can lead to scaling and corrosion of metal parts over long-term use. However, OPALLUB's new coolant strictly follows the international OAT (Organic Acid Technology) standard and rewrites the rules with "active protection"

Organic acid molecules will form a "nanoscale protective film" on the surface of cast iron cylinder bodies, cast aluminum water tanks, and copper pipelines, like an invisible armor, to prevent corrosion, rust, and scaling from the root;

According to laboratory tests, the protection period for aluminum components is up to 5 years/250000 kilometers, which is 2.5 times that of traditional coolant. The heat dissipation efficiency of the water tank remains above 95% for a long time.

📊Dual specification performance table: "Extreme challenge" from -50 ℃ extreme cold to 131 ℃ high temperature

According to the climate requirements of different regions, OPALLUB has launched two core specifications for its new coolant, each parameter of which has been validated in extreme environments:

Why are these two temperatures crucial?

Freezing point -40 ℃/-50 ℃

In the cold winter of minus 30 ℃ in the north, or in extremely cold regions such as Inner Mongolia and Xinjiang, the coolant will not freeze and expand, avoiding the freezing and cracking of water tanks and pipelines. It can circulate to key engine components within 3 seconds during cold start, reducing low-temperature wear;

Boiling point 129.5 ℃/131 ℃

During high-speed climbing and full load driving in summer, the temperature of the engine cylinder can soar to over 120 ℃. Ordinary coolant (with a boiling point of about 108 ℃) is prone to "boiling", while OPALLUB coolant can stably dissipate heat, ensuring that the engine runs at its optimal operating temperature (85-95 ℃) without power degradation.

Attention: Colors are for identification purposes only. The core formulas comply with OAT standards, and different colors cannot be mixed (to avoid additive reactions). When replacing, the old liquid must be thoroughly drained.

    The 'constant temperature protection' of the engine now has a more precise answer. OPALLUB's new coolant is not just a product upgrade, but also a practice of the "long-term protection" concept - allowing every car to enjoy the peace of mind of "zero failure" in every journey.

👉 Contact your local OPALLUB dealer immediately and choose an exclusive coolant solution based on your region and vehicle model!